IGET Bar Pro 10000 vs RELX HERC 12000: Key Differences

Meet the Two Devices

The IGET Bar Pro 10000 and RELX HERC 12000 both sit in the high-capacity segment of the disposable device market. Both are non-rechargeable, draw-activated and built around mesh coil technology. But beneath those surface similarities, the hardware tells a different story.

The Bar Pro 10000 focuses on a streamlined, no-display format with a 1.2 ohm mesh coil and a 2000 mAh battery. The HERC 12000, by contrast, packs a 2600 mAh battery, a smart side display for usage tracking, and consecutive-draw power adjustment — features that set it apart within the RELX product family.

This guide walks through each specification category to highlight where these two devices diverge, and what those differences might mean depending on what you're looking for.

Specifications Side by Side

Here is a direct comparison of the core specifications available for both devices.

The table makes one thing clear: while both devices serve a similar product category, the hardware priorities are noticeably different. The HERC 12000 brings additional functionality in the form of a display and power adjustment, while the Bar Pro 10000 keeps things more straightforward.

Battery & Capacity

The battery and capacity figures are among the most visible differences between these two devices.

The IGET Bar Pro 10000 is equipped with a 2000 mAh battery and a 20 mL capacity. The RELX HERC 12000 steps up to a 2600 mAh battery with an 18 mL capacity. This means the HERC has a larger battery but slightly smaller liquid capacity compared to the Bar Pro.

Battery capacity doesn't directly translate to a specific number of uses — it depends on draw length, frequency and device efficiency. What the numbers do indicate is the relative scale of the power source in each device. The HERC's larger battery is paired with a display and power adjustment features that may draw additional power, while the Bar Pro's smaller battery supports a more basic feature set.

Mesh Coil Designs

Both devices use mesh coil technology, but the specifications differ at the resistance level.

The IGET Bar Pro 10000 uses a 1.2 ohm Mesh Coil. The RELX HERC 12000 is listed with a Mesh Coil without a specific resistance value provided in the current product information.

Mesh coils are designed to provide more surface area for heating compared to traditional wire coils, which can contribute to a more consistent draw profile. The resistance difference — where available — is one of several hardware variables that can influence the overall draw experience, but without verified resistance data for the HERC, direct comparison is limited to what is publicly listed.

HERC Smart Side Display

One of the most distinctive features of the RELX HERC 12000 is its smart side display for usage tracking. This display provides real-time feedback on battery level and usage status — a feature not present on the IGET Bar Pro 10000.

For users who prefer having visual feedback on their device's status, the HERC's display adds a layer of information that the Bar Pro doesn't offer. The Bar Pro takes a more minimal approach, with no display functionality verified in its current product listing.

This difference is worth noting because it reflects two different design philosophies: one focused on additional functionality and real-time feedback, the other on a cleaner, display-free hardware experience.

Activation & Power Adjustment

Both devices are draw-activated, meaning they operate by inhaling on the mouthpiece — no buttons or switches required.

Where they differ is in the additional functionality. The RELX HERC 12000 supports consecutive-draw power adjustment, a feature that adjusts the power output based on consecutive draws. This is not a verified feature on the IGET Bar Pro 10000, which operates with a more straightforward draw-activated mechanism.

For users who value a more adaptive draw experience, the HERC's consecutive-draw adjustment may be a meaningful differentiator. For those who prefer a simpler, no-adjustment format, the Bar Pro's approach may be more aligned with their preferences.

Body Design & Weight

Both devices feature aluminium or aluminum body construction, giving them a metal finish that differs from fully plastic devices in the same category.

The IGET Bar Pro 10000 weighs 93 g. The RELX HERC 12000 does not have a verified weight listed in the current product information. This means the Bar Pro's weight is the only confirmed data point available for direct comparison.

The aluminium body on both devices contributes to a more substantial feel compared to all-plastic alternatives, though the exact weight difference between the two remains unverified.

Which Hardware Priorities Matter Most?

Rather than declaring one device "better" than the other, it's more useful to look at what each device emphasises.

Choose the IGET Bar Pro 10000 if: you prefer a straightforward, display-free device with a 20 mL capacity, 2000 mAh battery and a verified 1.2 ohm mesh coil — and you don't need on-device display feedback.

Choose the RELX HERC 12000 if: you value the smart side display for usage tracking, consecutive-draw power adjustment, and a larger 2600 mAh battery — and you're comfortable with an 18 mL capacity and unverified coil resistance.

Both devices are non-rechargeable, draw-activated and built with aluminium bodies. The real difference comes down to whether the additional functionality of the HERC — the display and power adjustment — aligns with what you're looking for, or whether the more minimal approach of the Bar Pro better fits your preferences.

Frequently Asked Questions

View the Devices

Explore the IGET Bar Pro 10000 and RELX HERC 12000 directly through their product pages.

IGET

IGET Bar Pro 10000

View Product

RELX

RELX HERC 12000

View Product

Continue Exploring